|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SoundScreen Data Sheet
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Product |
Reduction in Acoustic Energy |
R value (m2 K / W) |
Nominal Thickness |
Dimensions |
It e m s p e r Pack |
Coverage per Pack |
Coverage including Framework |
Product Code | |||||
|
Length |
Width | ||||||||||||
|
SoundScreen 1.6 for Walls, Floors and Ceilings |
50% |
1.6 |
60 mm |
1,350 mm |
430 mm |
6 |
3.5 m 2 |
3.9 m 2 |
21578 | ||||
|
50% |
1.6 |
60 mm |
1,350 mm |
580 mm |
6 |
4.7 m 2 |
5.2 m 2 |
21579 | |||||
|
SoundScreen 2.0 for Walls, Floors and Ceilings |
75% |
2.0 |
75 mm |
1,350 mm |
430 mm |
6 |
3.5 m 2 |
3.9 m 2 |
21580 | ||||
|
75% |
2.0 |
75 mm |
1,350 mm |
580 mm |
6 |
4.7 m 2 |
5.2 m 2 |
21581 | |||||
|
SoundScreen 3.0 for Floors and Ceilings |
85% |
3.0 |
115 mm |
430 mm |
580 mm |
9 |
2.2 m 2 |
2.5 m 2 |
21582 | ||||
SoundScreen is intended for use at temperatures normally prevailing in building structures. Maximum service temperature: 350°C.
When tested in accordance with AS/NZS 1530 Part 3-1999, SoundScreen products have the following fire indices:
| • Ignitability: 0 | • Heat Evolved: 0 |
| • Spread of Flame: 0 | • Smoke Developed: 0 |
Bradford SoundScreen will typically add:
|
Product |
Additional Rw |
|
SoundScreen 1.6 for Walls, Floors and Ceilings |
6 |
|
SoundScreen 2.0 for Walls, Floors and Ceilings |
6 |
|
4 |
Note: Depending on the wall system used, where Rw is the Weighted Sound Reduction Index. See the CSR High Performance Walls and Ceiling brochure for various system results.
SoundScreen is faintly alkaline and incapable of corroding steel. To maintain this condition, protection must be provided against contamination from external sources. When tested in accordance with BS 3958 Part 5-1986,Bradford SoundScreen products have a pH of 7.0-9.0.
Exposure to an atmosphere of 50°C and 95% relative humidity for four days, results in moisture absorption of less than 0.2% by volume. If the insulation becomes wet, full thermal efficiency will be restored on drying out.
The insulation material in the floors, walls and ceilings shall be Bradford SoundScreen as manufactured by CSRBradford Insulation, to fit tightly into stud or joists leaving no gaps in the insulation.
The International Association for Research into Cancer (IARC) has ruled that all Bradford Insulation products are non-carcinogenic, with no potential for causing cancer in humans.
All Bradford Insulation products are also endorsed by the Allergy Research Foundation of Australia and ideal for allergy and asthma suffers.
CSR Bradford Insulation guarantees that all our products are low allergen, will not pack down, shrink, mould, rot or deteriorate and, when installed in accordance with our directions, will last the lifetime of your home. Or, we will replace them absolutely free.
For more information simply call us on 07 38812300
| Home | About Us | Products | Thermal | Acoustic | Services | Contact Us | Copyright © 2005 B&B Insulations Pty Ltd. Web Design Gold Coast |