|
||||||||||||||||||||||||||||||||||||||||||||||||
EnviroSeal Wall Plus Data Sheet
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Strength |
Tensile Strength |
Edge Tear Strength |
Fold endurance strength |
|
Machine Direction |
10.0 kN/m |
500 N |
>2.0 |
|
Lateral Direction |
8.0 kN/m |
400 N |
>1.7 |
Dry Delamination Resistance: Pass Wet Delamination Resistance: Pass Shrinkage: < 0.5%
|
Product |
Dimensions |
m2 per roll |
Roll weight |
Rolls per pallet |
Product code | |
|
Width |
Length | |||||
|
EnviroSeal Wall Plus |
1350mm |
20m |
27 m2 |
3.5kg |
50 |
15127 |
|
1350mm |
60m |
81 m2 |
10.5kg |
50 |
15128 | |
Flammability test when tested in accordance with AS1530 Part 2 - 1993, the following flammability indices resulted:
| • Spread Factor 0 | • Heat Factor 1 |
| • Speed Factor 0 | • Flammability Index 1 |
Early fire hazard properties: when tested in accordance with AS1530 Part 3 - 1989, the following early fire hazardindices resulted:
| • Ignitability 0 | • Heat Evolved 0 |
| • Spread of Flame 0 | • Smoke Developed 0 |
Emissivity of Bright Foil Surface (ASTM - C445) = 4%. Reflectivity of Bright Foil Surface = 96%.
In accordance with AS/NZS 4200.1:
| • Duty: Light | • Water Barrier: High |
| • Vapour Barrier: Medium | • Flammability Index: Low |
| • Emittance: Reflective |
CSR Limited is committed to Building In Quality and CSR Bradford EnviroSealTM is guaranteed to perform to specifications in normal building applications when installed in accordance with AS/NZS 4200.2: 1994 Pliable Building Membranes and Underlays, Part 2 Installation Requirements. EnviroSeal Wall is not designed to withstand prolonged direct exposure to the elements, accordingly upon application of this product the outer roof or wall should be installed without delay. EnviroSeal products should not come into contact with wet concrete or other lime based products and should be stored in a dry place out of direct sunlight before use. To ensure effective performance and satisfactory lifespan, radiant barriers such as Thermofoil must be installed with a minimum airspace of 20mm on either side, or if faced to bulk insulation an airspace of at least 20mm on the opposing face.
Information on any known health risks of our products and how to handle them safely is on their packaging and/or the documentation accompanying them.
The International Association for Research into Cancer (IARC) has ruled that all Bradford Insulation products are non-carcinogenic, with no potential for causing cancer in humans.
All Bradford Insulation products are also endorsed by the Allergy Research Foundation of Australia and ideal for allergy and asthma suffers.
CSR Bradford Insulation guarantees that all our products are low allergen, will not pack down, shrink, mould, rot or deteriorate and, when installed in accordance with our directions, will last the lifetime of your home. Or, we will replace them absolutely free.
For more information Simply call us on 07 38812300
| Home | About Us | Products | Thermal | Acoustic | Services | Contact Us | Copyright © 2005 B&B Insulations Pty Ltd. Web Design Gold Coast |